Product
ALUMINUM TUBE EVAPORATOR
Aluminum finned tubes (double-ribbed aluminum finned tube evaporators) are mainly used in large and medium-sized low-temperature cold storage rooms from -5℃ to -40℃. They have the advantages of energy saving, high thermal conductivity, large heat exchange area, stable warehouse temperature, and easy installation, making them an excellent evaporator for low-temperature cold storage.
Belongs to:
ALUMINUM TUBE EVAPORATOR
Product Description
Product Introduction
Aluminum finned tube evaporators are mainly used in large and medium-sized low-temperature cold storage rooms from -5℃ to -40℃. They feature energy saving, high thermal conductivity, large heat exchange area, stable temperature, and easy installation, making them excellent evaporators for low-temperature cold storage.
Aluminum Finned Tube Performance Characteristics
1. No motor moving parts or defrosting heating wires, resulting in energy saving and low failure rate.
2. Installed on the top of the cold storage, no return air channel is required, resulting in high space utilization.
3. The aluminum finned tube adopts a double fin design, with a large heat exchange area, high thermal conductivity, large tube capacity, and a certain cold storage effect.
4. Light weight, easy installation, and the weight is about 1/5 of seamless steel pipes with the same heat exchange area.
5. Welded processing, simple structure, stable performance.
6. One-time molding, high pipe strength, and long service life.
7. High internal cleanliness, reducing the possibility of refrigeration system failures.
8. Easy installation, simply fixed with screws, saving wiring time and greatly shortening the cold storage installation cycle.
9. Compared with the forced air heat exchange of air coolers, the aluminum finned tube uses natural convection heat exchange, effectively reducing food dehydration and improving food quality.
Aluminum Finned Tube Parameter Table
|
Serial Number |
Name |
Model |
Cooling Capacity (W) |
Heat Exchange Area (m²) |
(Tube Length * Quantity) |
Dimensions (L*W mm) |
|
|
1 |
Aluminum Finned Tube Evaporator |
LP-1.0/2000*12 |
960 |
8 |
2000mm*12 |
2200 |
1320 |
|
2 |
LP-1.2/2500*12 |
1200 |
10 |
2500mm*12 |
2700 |
1320 |
|
|
3 |
LP-1.5/3000*12 |
1440 |
12 |
3000mm*12 |
3200 |
1320 |
|
|
4 |
LP-1.9/4000*12 |
1920 |
16 |
4000mm*12 |
4200 |
1320 |
|
|
5 |
LP-2.4/5000*12 |
2400 |
20 |
5000mm*12 |
5200 |
1320 |
|
|
6 |
LP-2.9/6000*12 |
2880 |
24 |
6000mm*12 |
6200 |
1320 |
|
|
7 |
Other specifications: Customized according to customer requirements |
|
Approximately 3 meters per square meter |
|
|
||
Keyword:
Refrigeration equipment
Compressor
Refrigeration fittings
Cooperation Intention Form
Leave your phone number, and we will contact you as soon as possible.
More Products
Safety SCW Series Horizontal Liquid Receiver
The inlet and outlet of SCW series horizontal liquid receiver are assembled with global valves.All the models are designed with 1/4”-18NPT safety valve connection. The designed pressure: 3.0MPa； Applicable refrigerants models：R134a, R22, R407C, R404A, R507A。
Safety SYQ Series Oil Seperator
SYQ series oil separator features a centrifugal separation. It can achieve high efficiency of oil separation with minimal pressure drop.SYQ series oil separator is designed for the parallel compressor units which installs electronic oil level regulator.it canstorage the separated oil in the bottom of the reservoir and send the oil which rely on the pressure differential between oil separator and compressor crankcase to each compressor crankcase by electronic oil level controller. There was no float ball valve .New upgraded product with 3/8”-18NPT oil charging port.Convenient for lubricant oil charging
SYM series oil separator is mainly used for piston compressor and piston parallel compressor unit. SYM series oil separator features a centrifugal separation.It can achieve high efficiency of oil separation with minimal pressure drop Helical guide plate. It can keep high oil separation efficiency while the parallel compressor unit in load shedding or load.The gaseous refrigerants with suspended oil particles from the compressor and enters into the oil separator, the refrigerants with suspended oil particles contact the Helical guide plate , and rotate along the guide plate. Under the action of centrifugal force, the oil particles is separated into the edge of the Helical guide plate and on the vessel internal wall of the oil separator, where the isolated oil particles gather into larger oil droplets and flow into the oil collection area at the bottom of the oil separator. Designed pressure： 3.0MPa； Applicable refrigerants Models：R134a, R22, R407C, R404A, R507A.
Safety SYG Series Oil Seperator
SYG series oil separator primary used for Piston compressors,Piston parallel compressor units and the secondary oil separation of the spiral machines. SYG series oil separator features a centrifugal separation that can achieve high efficiency of oil separation with minimal pressure drop. The helical guide platecan keep high oil separation efficiency while the parallel compressor unit in load shedding or load change. There was installed a mist eliminator with stainless steel wires inside the oil separator, thus forming a barrier that captures the misty oil, making the oil flocculate,causing them toimpact each other, gather, and adsorb onto the mist eliminator to become oil droplets, finally reach the oil collection area of the separator by gravity. In this area, there was a flange that can separate the impurities of the oil droplets, also there was a permanent magnet which means it can absorb the iron debris. Designed pressure：3.0MPa；