Product
Refrigerant Receivers
After the high-pressure refrigerant is cooled in the condenser, it becomes a mixture of liquid and gas. However, to achieve optimal cooling, it must be in a liquid state before entering the evaporator. Therefore, a receiver tank is necessary to store the high-pressure refrigerant. Liquid refrigerant is then drawn from the bottom of the tank and sent to the evaporator, allowing the evaporator to operate at its best and achieve optimal cooling. Safe working pressure: -40 PSIG (suitable for various refrigerants and R410A refrigerant).
Belongs to:
Reservoir
Product Description
After the high-pressure refrigerant dissipates heat in the condenser, it becomes a mixture of liquid and gas. However, to achieve optimal cooling, it must be in a liquid state before entering the evaporator. Therefore, a receiver tank is necessary to store the high-pressure refrigerant. Liquid refrigerant is then drawn from the bottom of the tank and sent to the evaporator, allowing the evaporator to operate at its best and achieve optimal cooling. Safe working pressure: -40 PSIG (applicable to various refrigerants and R410A refrigerant).
Technical Parameters
Unit: mm
| Model | Product Number | Dimensions (mm) | Inlet Specification | Outlet Specification | Refrigerant Capacity (liters) | |
| Diameter A | Tank Body Length B | |||||
| CR | CR-101-2 | 85.00 | 200.00 | 3/8" | 1/4" | 0.95 |
| CR-101-3 | 85.00 | 200.00 | 3/8" | 3/8" | 0.95 | |
| CR-102 | 127.00 | 260.00 | 3/8" | 3/8" | 3.00 | |
| CR-103 | 127.00 | 300.00 | 3/8" | 3/8" | 3.40 | |
| CR-104 | 152.00 | 350.00 | 1/2" | 1/2" | 5.90 | |
| CR-105 | 178.00 | 410.00 | 5/8" | 5/8" | 9.55 | |
| CR-106 | 205.00 | 380.00 | 3/4" | 3/4" | 11.45 | |
| CR-107 | 216.00 | 460.00 | 7/8" | 7/8" | 15.47 | |
Keyword:
Refrigeration equipment
Compressor
Refrigeration fittings
Cooperation Intention Form
Leave your phone number, and we will contact you as soon as possible.
More Products
Safety SCW Series Horizontal Liquid Receiver
The inlet and outlet of SCW series horizontal liquid receiver are assembled with global valves.All the models are designed with 1/4”-18NPT safety valve connection. The designed pressure: 3.0MPa； Applicable refrigerants models：R134a, R22, R407C, R404A, R507A。
Safety SYQ Series Oil Seperator
SYQ series oil separator features a centrifugal separation. It can achieve high efficiency of oil separation with minimal pressure drop.SYQ series oil separator is designed for the parallel compressor units which installs electronic oil level regulator.it canstorage the separated oil in the bottom of the reservoir and send the oil which rely on the pressure differential between oil separator and compressor crankcase to each compressor crankcase by electronic oil level controller. There was no float ball valve .New upgraded product with 3/8”-18NPT oil charging port.Convenient for lubricant oil charging
SYM series oil separator is mainly used for piston compressor and piston parallel compressor unit. SYM series oil separator features a centrifugal separation.It can achieve high efficiency of oil separation with minimal pressure drop Helical guide plate. It can keep high oil separation efficiency while the parallel compressor unit in load shedding or load.The gaseous refrigerants with suspended oil particles from the compressor and enters into the oil separator, the refrigerants with suspended oil particles contact the Helical guide plate , and rotate along the guide plate. Under the action of centrifugal force, the oil particles is separated into the edge of the Helical guide plate and on the vessel internal wall of the oil separator, where the isolated oil particles gather into larger oil droplets and flow into the oil collection area at the bottom of the oil separator. Designed pressure： 3.0MPa； Applicable refrigerants Models：R134a, R22, R407C, R404A, R507A.
Safety SYG Series Oil Seperator
SYG series oil separator primary used for Piston compressors,Piston parallel compressor units and the secondary oil separation of the spiral machines. SYG series oil separator features a centrifugal separation that can achieve high efficiency of oil separation with minimal pressure drop. The helical guide platecan keep high oil separation efficiency while the parallel compressor unit in load shedding or load change. There was installed a mist eliminator with stainless steel wires inside the oil separator, thus forming a barrier that captures the misty oil, making the oil flocculate,causing them toimpact each other, gather, and adsorb onto the mist eliminator to become oil droplets, finally reach the oil collection area of the separator by gravity. In this area, there was a flange that can separate the impurities of the oil droplets, also there was a permanent magnet which means it can absorb the iron debris. Designed pressure：3.0MPa；