Product
Refrigerant Oil Separators
During operation, the high-pressure outlet of the refrigerant compressor usually contains a large amount of refrigerant oil. To protect the compressor from oil loss and prevent refrigerant oil from flowing into the system and affecting the heat dissipation function of the condenser and the refrigeration effect of the evaporator, an oil separator must be installed to separate the refrigerant oil and refrigerant. Then, the float structure inside the oil separator uses the high and low pressure difference principle to force the refrigerant oil to flow back to the compressor crankcase through the return oil pipe. This ensures that the compressor does not lack oil and achieves the best refrigeration effect.
Belongs to:
Oil separator
Product Description
During operation, the refrigerant compressor's high-pressure outlet typically contains a significant amount of refrigerant oil. To prevent oil loss from the compressor and to stop refrigerant oil from flowing into the system and affecting the condenser's heat dissipation and the evaporator's cooling efficiency, an oil separator must be installed. This separates the refrigerant oil from the refrigerant. Then, the oil separator's internal float structure uses the high and low-pressure differential to force the refrigerant oil back to the compressor crankcase via the return oil pipe. This ensures the compressor does not lack oil and achieves optimal cooling performance.
Technical Parameters
|
Non-removable |
Dimensions (mm) |
||||
|
Model |
Product Number |
Inlet/Outlet Specifications |
Diameter A |
Barrel Length B |
Inlet/Outlet Length C |
|
S-4000H |
S-4004H |
1/2”ODS |
101.6 |
245.00 |
35.00 |
|
S-4005H |
5/8”ODS |
340.00 |
35.00 |
||
|
S-4007H |
7/8”ODS |
415.00 |
40.00 |
||
|
S-4011H |
11/8”ODS |
415.00 |
45.00 |
||
|
S-5500H |
S-5511H |
11/8”ODS |
140.00 |
395.00 |
45.00 |
|
S-5513H |
13/8”ODS |
425.00 |
50.00 |
||
|
S-5515H |
15/8”ODS |
425.00 |
50.00 |
||
|
S-6500H |
S-652H |
21/8”ODS |
165.00 |
490.00 |
60.00 |
|
S-4000 |
S-4004S |
1/2”ODS |
101.6 |
215.00 |
35.00 |
|
S-4004 |
1/2”ODS |
245.00 |
35.00 |
||
|
S-4005 |
5/8”ODS |
340.00 |
35.00 |
||
|
S-4007 |
7/8”ODS |
415.00 |
40.00 |
||
|
S-4011 |
11/8”ODS |
415.00 |
45.00 |
||
|
S-4013 |
13/8”ODS |
415.00 |
50.00 |
||
|
S-5500 |
S-5511 |
11/8”ODS |
140.00 |
395.00 |
45.00 |
|
S-5513 |
13/8”ODS |
425.00 |
50.00 |
||
|
S-5515 |
15/8”ODS |
425.00 |
50.00 |
||
|
S-6500 |
S-3521 |
21/8”ODS |
165.00 |
490.00 |
60.00 |
Keyword:
Refrigeration equipment
Compressor
Refrigeration fittings
Cooperation Intention Form
Leave your phone number, and we will contact you as soon as possible.
More Products
Safety SCW Series Horizontal Liquid Receiver
The inlet and outlet of SCW series horizontal liquid receiver are assembled with global valves.All the models are designed with 1/4”-18NPT safety valve connection. The designed pressure: 3.0MPa； Applicable refrigerants models：R134a, R22, R407C, R404A, R507A。
Safety SYQ Series Oil Seperator
SYQ series oil separator features a centrifugal separation. It can achieve high efficiency of oil separation with minimal pressure drop.SYQ series oil separator is designed for the parallel compressor units which installs electronic oil level regulator.it canstorage the separated oil in the bottom of the reservoir and send the oil which rely on the pressure differential between oil separator and compressor crankcase to each compressor crankcase by electronic oil level controller. There was no float ball valve .New upgraded product with 3/8”-18NPT oil charging port.Convenient for lubricant oil charging
SYM series oil separator is mainly used for piston compressor and piston parallel compressor unit. SYM series oil separator features a centrifugal separation.It can achieve high efficiency of oil separation with minimal pressure drop Helical guide plate. It can keep high oil separation efficiency while the parallel compressor unit in load shedding or load.The gaseous refrigerants with suspended oil particles from the compressor and enters into the oil separator, the refrigerants with suspended oil particles contact the Helical guide plate , and rotate along the guide plate. Under the action of centrifugal force, the oil particles is separated into the edge of the Helical guide plate and on the vessel internal wall of the oil separator, where the isolated oil particles gather into larger oil droplets and flow into the oil collection area at the bottom of the oil separator. Designed pressure： 3.0MPa； Applicable refrigerants Models：R134a, R22, R407C, R404A, R507A.
Safety SYG Series Oil Seperator
SYG series oil separator primary used for Piston compressors,Piston parallel compressor units and the secondary oil separation of the spiral machines. SYG series oil separator features a centrifugal separation that can achieve high efficiency of oil separation with minimal pressure drop. The helical guide platecan keep high oil separation efficiency while the parallel compressor unit in load shedding or load change. There was installed a mist eliminator with stainless steel wires inside the oil separator, thus forming a barrier that captures the misty oil, making the oil flocculate,causing them toimpact each other, gather, and adsorb onto the mist eliminator to become oil droplets, finally reach the oil collection area of the separator by gravity. In this area, there was a flange that can separate the impurities of the oil droplets, also there was a permanent magnet which means it can absorb the iron debris. Designed pressure：3.0MPa；