Product
SRC-S series screw compressor
The RefComp SRC-S series semi-hermetic screw compressor has 18 models, with a discharge range of 118~1100m3/h, suitable for medium and high temperature refrigeration applications. The SRC-S has a built-in oil separator, compact structure, easy installation, low noise, and high efficiency. It has corresponding configurations for different applications such as full-liquid, normal temperature heat pumps, and chiller units.
Belongs to:
SRC-S series screw compressor
Product Description
The RefComp SRC-S series semi-hermetic screw compressors comprises 18 models, with a discharge range of 118~1100m3/h, suitable for medium and high-temperature refrigeration applications. The SRC-S features a built-in oil separator, compact structure, easy installation, low noise, and high efficiency. It offers various configurations for different applications, including flooded systems, ambient temperature heat pumps, and chiller units.
Product Features
Utilizes RefComp designed asymmetric screw rotor tooth profile, 5:6 configuration, ensuring good lubrication;
Tight meshing between teeth, resulting in smooth and quiet compressor operation;
Compact overall dimensions, integrating filter, shut-off valve, and temperature sensor into the unit body;
Equipped with a motor protection module, providing protection against motor overheating, reverse rotation, and phase loss;
Operation information tracking, providing real-time feedback on motor and system operating status;
Multiple bearing combinations, ensuring a long service life, high load, and low noise;
Built-in oil separator, multi-stage high-efficiency separation;
Special structural design and spatial layout, utilizing the refrigerant gas flowing from the suction shut-off valve to the suction side of the screw to effectively cool the motor;
Suction/discharge shut-off valves are rotatable, allowing for easy and flexible installation;
Built-in safety valve, ensuring safe and reliable operation.
Technical Parameters
|
Model SRC-S（W） |
113 |
133 |
163 |
183 |
213 |
255 |
285 |
305 |
353 |
|
|
Discharge Volume 50/60（Hz） |
m³ 3/h |
118/142 |
150/180 |
175/210 |
205/246 |
237/284 |
286/343 |
318/382 |
341/409 |
402/482 |
|
Weight |
kg |
325 |
330 |
335 |
510 |
515 |
615 |
590 |
625 |
730 |
|
Oil Charge |
dm³ 3 |
6 |
6 |
6 |
7 |
7 |
10 |
10 |
10 |
14 |
|
Energy Control |
|
Stepped: Full load, 75%, 50%, minimum. |
||||||||
|
Standard Motor |
|
400V/3/50Hz-460V/3/60Hz |
||||||||
|
Model SRC-S（W） |
413 |
463 |
503 |
553 |
603 |
755 |
785 |
885 |
985 |
|
|
Discharge Volume 50/60（Hz） |
m³ 3/h |
445/534 |
510/612 |
562/674 |
600/720 |
700/840 |
860/1032 |
910/1092 |
1000/1200 |
1100/1320 |
|
Weight |
kg |
14 |
16 |
19 |
19 |
20 |
23 |
25 |
25 |
25 |
|
Oil Charge |
dm³ 3 |
|
|
|
|
|
|
|
|
|
|
Energy Control |
|
Stepped: Full load, 75%, 50%, minimum. |
||||||||
|
Standard Motor |
|
400V/3/50Hz-460V/3/60Hz |
||||||||
Note: Please contact us directly for detailed information.
Keyword:
Refrigeration equipment
Compressor
Refrigeration fittings
Cooperation Intention Form
Leave your phone number, and we will contact you as soon as possible.
More Products
Safety SCW Series Horizontal Liquid Receiver
The inlet and outlet of SCW series horizontal liquid receiver are assembled with global valves.All the models are designed with 1/4”-18NPT safety valve connection. The designed pressure: 3.0MPa； Applicable refrigerants models：R134a, R22, R407C, R404A, R507A。
Safety SYQ Series Oil Seperator
SYQ series oil separator features a centrifugal separation. It can achieve high efficiency of oil separation with minimal pressure drop.SYQ series oil separator is designed for the parallel compressor units which installs electronic oil level regulator.it canstorage the separated oil in the bottom of the reservoir and send the oil which rely on the pressure differential between oil separator and compressor crankcase to each compressor crankcase by electronic oil level controller. There was no float ball valve .New upgraded product with 3/8”-18NPT oil charging port.Convenient for lubricant oil charging
SYM series oil separator is mainly used for piston compressor and piston parallel compressor unit. SYM series oil separator features a centrifugal separation.It can achieve high efficiency of oil separation with minimal pressure drop Helical guide plate. It can keep high oil separation efficiency while the parallel compressor unit in load shedding or load.The gaseous refrigerants with suspended oil particles from the compressor and enters into the oil separator, the refrigerants with suspended oil particles contact the Helical guide plate , and rotate along the guide plate. Under the action of centrifugal force, the oil particles is separated into the edge of the Helical guide plate and on the vessel internal wall of the oil separator, where the isolated oil particles gather into larger oil droplets and flow into the oil collection area at the bottom of the oil separator. Designed pressure： 3.0MPa； Applicable refrigerants Models：R134a, R22, R407C, R404A, R507A.
Safety SYG Series Oil Seperator
SYG series oil separator primary used for Piston compressors,Piston parallel compressor units and the secondary oil separation of the spiral machines. SYG series oil separator features a centrifugal separation that can achieve high efficiency of oil separation with minimal pressure drop. The helical guide platecan keep high oil separation efficiency while the parallel compressor unit in load shedding or load change. There was installed a mist eliminator with stainless steel wires inside the oil separator, thus forming a barrier that captures the misty oil, making the oil flocculate,causing them toimpact each other, gather, and adsorb onto the mist eliminator to become oil droplets, finally reach the oil collection area of the separator by gravity. In this area, there was a flange that can separate the impurities of the oil droplets, also there was a permanent magnet which means it can absorb the iron debris. Designed pressure：3.0MPa；